Sorry about the font – is this better? Daniel G. noted that the directory seems to be missing. Not sure why since export was properly set up. Thanks.

-Jeff

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

My config and log (with DEBUG on) is below. Yes we did not change anything except for adding a bind mount for /ecco (which triggered this). Thanks.

-Jeff

ganesha:~ # cat /etc/ganesha/ganesha.conf

###################################################

# Ganesha Config Example

# This is a commented example configuration file for Ganesha. It is not

# complete, but only has some common configuration options. See the man pages

# for complete documentation.

###################################################

## These are core parameters that affect Ganesha as a whole.

NFS_CORE_PARAM {

## Allow NFSv3 to mount paths with the Pseudo path, the same as NFSv4,

## instead of using the physical paths.

mount_path_pseudo = true;

## Configure the protocols that Ganesha will listen for. This is a hard

## limit, as this list determines which sockets are opened. This list

## can be restricted per export, but cannot be expanded.

Protocols = 4;

## Configure RPC timeout to a long time

RPC_Idle_Timeout_S = 3600;

}

## Configure NFSv4

NFSv4 {

Allow_Numeric_Owners = true;

Only_Numeric_Owners = true;

}

## These are defaults for exports. They can be overridden per-export.

## EXPORT_DEFAULTS {

## Access type for clients. Default is None, so some access must be

## given either here or in the export itself.

## Access_Type = RW;

## }

## Configure settings for the object handle cache

CACHEINODE {

## The point at which object cache entries will start being reused.

Entries_HWMark = 100000;

}

## Configure exports

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1001;

## Exported path (mandatory)

Path = /srv/rex/exports/BD_public_datasets;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /BD_public;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1002;

## Exported path (mandatory)

Path = /srv/rex/exports/ECCO_PD;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /ecco;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1003;

## Exported path (mandatory)

Path = /srv/rex/exports/QuAIL;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /quail;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1004;

## Exported path (mandatory)

Path = /srv/rex/exports/legacygcmdata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /legacygcm;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1005;

## Exported path (mandatory)

Path = /srv/rex/exports/data_nasa_gov_nas_storage;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /openinnovation;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1006;

## Exported path (mandatory)

Path = /srv/rex/exports/geonexdata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /geonex;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1007;

## Exported path (mandatory)

Path = /srv/rex/exports/PlutoGCM;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /PlutoGCM;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1008;

## Exported path (mandatory)

Path = /srv/rex/exports/spinglasseigendata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /private;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1009;

## Exported path (mandatory)

Path = /srv/rex/exports/smodedata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /smode;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1010;

## Exported path (mandatory)

Path = /srv/rex/exports/fv3gcmdata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /fv3gcm;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1011;

## Exported path (mandatory)

Path = /srv/rex/exports/velahalosdata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /velahalos;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1012;

## Exported path (mandatory)

Path = /srv/rex/exports/carboncycledata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /carboncycle;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1013;

## Exported path (mandatory)

Path = /srv/rex/exports/hmidata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /hmi;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1014;

## Exported path (mandatory)

Path = /srv/rex/exports/vizdata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /viz;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1015;

## Exported path (mandatory)

Path = /srv/rex/exports/venusdata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /venus;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1016;

## Exported path (mandatory)

Path = /srv/rex/exports/fun3ddata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /fun3d;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1017;

## Exported path (mandatory)

Path = /srv/rex/exports/co2fluxdata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /co2flux;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1018;

## Exported path (mandatory)

Path = /srv/rex/exports/heliodata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /helio;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1019;

## Exported path (mandatory)

Path = /srv/rex/exports/sphdynpcdata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /sphdynpc;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1020;

## Exported path (mandatory)

Path = /srv/rex/exports/vizpublic;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /vizpub;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 198.9.3.97,198.9.3.98,129.99.240.20;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1021;

## Exported path (mandatory)

Path = /srv/rex/exports/titanwrf1data;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /titanwrf1;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1022;

## Exported path (mandatory)

Path = /srv/rex/exports/mcmapdata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /mcmap;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

EXPORT

{

## Export Id (mandatory, each EXPORT must have a unique Export_Id)

Export_Id = 1023;

## Exported path (mandatory)

Path = /srv/rex/exports/galemcdata;

## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)

Pseudo = /galemc;

## Restrict the protocols that may use this export. This cannot allow

## access that is denied in NFS_CORE_PARAM.

#Protocols = 3,4;

## Access type for clients. Default is None, so some access must be

## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block

Access_Type = RO;

## Whether to squash various users.

Squash = root_squash;

## Allowed security types for this export

#Sectype = sys,krb5,krb5i,krb5p;

## Exporting FSAL

FSAL {

Name = PROXY;

Srv_Addr = 10.2.21.11;

}

CLIENT

{

Clients = 129.99.10.106,129.99.10.107,198.9.3.97,198.9.3.98;

}

## Configure logging. Default is to log to Syslog. Basic logging can also be

## configured from the command line

LOG {

## Default log level for all components

Default_Log_Level = DEBUG;

## Configure per-component log levels.

Components {

FSAL = DEBUG;

EXPORT = DEBUG;

}

## Where to log

Facility {

name = FILE;

destination = "/var/log/ganesha/ganesha.log";

enable = active;

}

### relevant Ganesha log ###

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] load_fsal :NFS STARTUP :DEBUG :Loading FSAL PROXY with /usr/lib64/ganesha/libfsalproxy.so

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG :FileSystem info for FSAL PROXY {

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : maxfilesize = 7FFFFFFFFFFFFFFF

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : maxlink = 8

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : maxnamelen = 1024

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : maxpathlen = 1024

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : no_trunc = 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : chown_restricted = 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : case_insensitive = 0

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : case_preserving = 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : link_support = 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : symlink_support = 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : lock_support = 0

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : lock_support_async_block = 0

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : named_attr = 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : unique_handles = 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : acl_support = 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : cansettime = 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : homogenous = 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : supported_attrs = 11DFCE

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : maxread = 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : maxwrite = 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : umask = 0

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : auth_exportpath_xdev = 0

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : delegations = 0

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : pnfs_mds = 0

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : pnfs_ds = 0

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : fsal_trace = 0

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : fsal_grace = 0

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG : expire_time_parent = -1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] display_fsinfo :FSAL :DEBUG :}

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] dirmap_lru_init :NFS READDIR :DEBUG :Skipping dirmap PROXY/MDC

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxRead to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxWrite to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1001 created at pseudo (/BD_public) with path (/srv/rex/exports/BD_public_datasets) and tag ((null)) perms (options=033030a2/000001e7 root_squash , R-r-, , , , , , , )

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1001 has 4 defined clients

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_recv :FSAL :DEBUG :Connected after 0 sleeps, resending outstanding calls

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new client id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setclientid :FSAL :EVENT :Negotiating a new ClientId with the remote server

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227759 with 156 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 80000064, xid 1616227759

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new session id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setsessionid :FSAL :DEBUG :Getting new session id for client id ad28386076657086 with sequence id 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227760 with 172 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 8000007c, xid 1616227760

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227761 with 144 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] dirmap_lru_init :NFS READDIR :DEBUG :Skipping dirmap PROXY/MDC

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxRead to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxWrite to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1002 created at pseudo (/ecco) with path (/srv/rex/exports/ECCO_PD) and tag ((null)) perms (options=033030a2/000001e7 root_squash , R-r-, , , , , , , )

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1002 has 4 defined clients

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_recv :FSAL :DEBUG :Connected after 0 sleeps, resending outstanding calls

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new client id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setclientid :FSAL :EVENT :Negotiating a new ClientId with the remote server

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227759 with 156 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 80000064, xid 1616227759

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new session id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setsessionid :FSAL :DEBUG :Getting new session id for client id ad28386077657086 with sequence id 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227760 with 172 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 8000007c, xid 1616227760

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227761 with 144 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] dirmap_lru_init :NFS READDIR :DEBUG :Skipping dirmap PROXY/MDC

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxRead to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxWrite to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1003 created at pseudo (/quail) with path (/srv/rex/exports/QuAIL) and tag ((null)) perms (options=033030a2/000001e7 root_squash , R-r-, , , , , , , )

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1003 has 4 defined clients

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_recv :FSAL :DEBUG :Connected after 0 sleeps, resending outstanding calls

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new client id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setclientid :FSAL :EVENT :Negotiating a new ClientId with the remote server

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227759 with 156 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 80000064, xid 1616227759

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new session id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setsessionid :FSAL :DEBUG :Getting new session id for client id ad28386078657086 with sequence id 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227760 with 172 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 8000007c, xid 1616227760

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227761 with 144 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] dirmap_lru_init :NFS READDIR :DEBUG :Skipping dirmap PROXY/MDC

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxRead to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxWrite to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1004 created at pseudo (/legacygcm) with path (/srv/rex/exports/legacygcmdata) and tag ((null)) perms (options=033030a2/000001e7 root_squash , R-r-, , , , , , , )

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1004 has 4 defined clients

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_recv :FSAL :DEBUG :Connected after 0 sleeps, resending outstanding calls

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new client id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setclientid :FSAL :EVENT :Negotiating a new ClientId with the remote server

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227759 with 156 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 80000064, xid 1616227759

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new session id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setsessionid :FSAL :DEBUG :Getting new session id for client id ad28386079657086 with sequence id 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227760 with 172 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 8000007c, xid 1616227760

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227761 with 144 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] dirmap_lru_init :NFS READDIR :DEBUG :Skipping dirmap PROXY/MDC

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxRead to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxWrite to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1005 created at pseudo (/openinnovation) with path (/srv/rex/exports/data_nasa_gov_nas_storage) and tag ((null)) perms (options=033030a2/000001e7 root_squash , R-r-, , , , , , , )

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1005 has 4 defined clients

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_recv :FSAL :DEBUG :Connected after 0 sleeps, resending outstanding calls

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new client id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setclientid :FSAL :EVENT :Negotiating a new ClientId with the remote server

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227759 with 156 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 80000064, xid 1616227759

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 80000078, xid 1616227761

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new session id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setsessionid :FSAL :DEBUG :Getting new lease 90

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setsessionid :FSAL :DEBUG :Getting new session id for client id ad2838607a657086 with sequence id 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227760 with 172 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 8000007c, xid 1616227760

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227761 with 144 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] dirmap_lru_init :NFS READDIR :DEBUG :Skipping dirmap PROXY/MDC

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxRead to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxWrite to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1006 created at pseudo (/geonex) with path (/srv/rex/exports/geonexdata) and tag ((null)) perms (options=033030a2/000001e7 root_squash , R-r-, , , , , , , )

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1006 has 4 defined clients

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_recv :FSAL :DEBUG :Connected after 0 sleeps, resending outstanding calls

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new client id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setclientid :FSAL :EVENT :Negotiating a new ClientId with the remote server

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227759 with 156 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] dirmap_lru_init :NFS READDIR :DEBUG :Skipping dirmap PROXY/MDC

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxRead to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxWrite to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1007 created at pseudo (/PlutoGCM) with path (/srv/rex/exports/PlutoGCM) and tag ((null)) perms (options=033030a2/000001e7 root_squash , R-r-, , , , , , , )

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1007 has 4 defined clients

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_recv :FSAL :DEBUG :Connected after 0 sleeps, resending outstanding calls

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new client id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setclientid :FSAL :EVENT :Negotiating a new ClientId with the remote server

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227759 with 156 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] dirmap_lru_init :NFS READDIR :DEBUG :Skipping dirmap PROXY/MDC

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxRead to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxWrite to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1008 created at pseudo (/private) with path (/srv/rex/exports/spinglasseigendata) and tag ((null)) perms (options=033030a2/000001e7 root_squash , R-r-, , , , , , , )

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1008 has 4 defined clients

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_recv :FSAL :DEBUG :Connected after 0 sleeps, resending outstanding calls

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new client id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setclientid :FSAL :EVENT :Negotiating a new ClientId with the remote server

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_compoundv4_call :FSAL :DEBUG :First attempt to send XID 1616227759 with 156 bytes

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] dirmap_lru_init :NFS READDIR :DEBUG :Skipping dirmap PROXY/MDC

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxRead to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] fsal_cfg_commit :CONFIG :INFO :Readjusting MaxWrite to FSAL, 67108864 -> 1048576

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1009 created at pseudo (/smode) with path (/srv/rex/exports/smodedata) and tag ((null)) perms (options=033030a2/000001e7 root_squash , R-r-, , , , , , , )

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[main] export_commit_common :CONFIG :INFO :Export 1009 has 4 defined clients

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_recv :FSAL :DEBUG :Connected after 0 sleeps, resending outstanding calls

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 80000078, xid 1616227761

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_rcv_thread] pxy_rpc_read_reply :FSAL :DEBUG :Recmark 80000064, xid 1616227759

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setsessionid :FSAL :DEBUG :Getting new lease 90

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new session id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setsessionid :FSAL :DEBUG :Getting new session id for client id ad2838607b657086 with sequence id 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_clientid_renewer :FSAL :DEBUG :Need 1 new session id

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setsessionid :FSAL :DEBUG :Getting new session id for client id ad2838607c657086 with sequence id 1

19/03/2021 18:57:26 : epoch 6054f416 : ganesha : ganesha.nfsd-88505[pxy_clientid_renewer] pxy_setsessionid :FSAL :DEBUG :Getting new session id for client id ad2838607d657086 with sequence id 1