showmount -e x.x.x.x ? -----Original Message----- From: Billich Heinrich Rainer (PSI) [mailto:heiner.billich@psi.ch] Sent: maandag 6 augustus 2018 18:57 To: support@lists.nfs-ganesha.org Subject: [Nfs-Ganesha-Support] how to get the current active exports configuration? Hello, Is there a way to get nfs-ganesha's current active exports configuration as it is in use by the running instance? Something like 'exportfs -v' in kernel-nfs. I did set parameters on default, export and client level and want to make sure that things work as I expect. Especially access and squash settings per client and export would be good to know. Testing from client side seem excessively tedious if you want to test no-access for a large group of clients. I did increase the log level but didn't see the access options or other beside pseudo_path and tag. I did not see any clients mentioned at all. But maybe I missed it? The Dbus interface seems to provide just a very basic set of export parameters(?) If this is documented somewhere please excuse the noise - a pointer to the answer will be welcome, too. We run 2.5.3 on RHEL7 (as part of Spectrum Scale) Thank you and kind regards, Heiner -- Paul Scherrer Institut Science IT Heiner Billich WHGA 106 CH 5232 Villigen PSI 056 310 36 02 https://www.psi.ch _______________________________________________ Support mailing list -- support@lists.nfs-ganesha.org To unsubscribe send an email to support-leave@lists.nfs-ganesha.org