2:01 p.m.
Hi. I just built ganesha 3.2, and am trying to set up a PROXY mount. I’m trying to resolve
the following error. My server NFSD is up, running, and rpcinfo -p shows the right ports
etc.
nfs-ganesha-64067[pxy_rcv_thread] pxy_rpc_recv :FSAL :CRIT :Cannot connect to server
10.151.27.27:2049:2049
My ganesh.conf file is as follows. Please advise on how to proceed. Thanks.
-Jeff
## These are core parameters that affect Ganesha as a whole.
NFS_CORE_PARAM {
## Allow NFSv3 to mount paths with the Pseudo path, the same as NFSv4,
## instead of using the physical paths.
mount_path_pseudo = true;
## Configure the protocols that Ganesha will listen for. This is a hard
## limit, as this list determines which sockets are opened. This list
## can be restricted per export, but cannot be expanded.
Protocols = 4;
}
## Configure NFSv4
NFSv4 {
Alow_Numeric_Owners = true;
Only_Numeric_Owners = true;
}
## These are defaults for exports. They can be overridden per-export.
EXPORT_DEFAULTS {
## Access type for clients. Default is None, so some access must be
## given either here or in the export itself.
Access_Type = RW;
}
## Configure settings for the object handle cache
CACHEINODE {
## The point at which object cache entries will start being reused.
Entries_HWMark = 100000;
}
## Configure exports
EXPORT
{
## Export Id (mandatory, each EXPORT must have a unique Export_Id)
Export_Id = 1111;
## Exported path (mandatory)
Path = /nobackupp16/jcbecker;
## Pseudo Path (required for NFSv4 or if mount_path_pseudo = true)
Pseudo = /foo;
## Restrict the protocols that may use this export. This cannot allow
## access that is denied in NFS_CORE_PARAM.
#Protocols = 3,4;
## Access type for clients. Default is None, so some access must be
## given. It can be here, in the EXPORT_DEFAULTS, or in a CLIENT block
Access_Type = RW;
## Whether to squash various users.
Squash = root_squash;
## Allowed security types for this export
#Sectype = sys,krb5,krb5i,krb5p;
## Exporting FSAL
FSAL {
Name = PROXY;
Srv_Addr = 10.151.27.27;
}
CLIENT
{
Clients = 10.151.26.24;
}
}
## Configure logging. Default is to log to Syslog. Basic logging can also be
## configured from the command line
LOG {
## Default log level for all components
Default_Log_Level = INFO;
## Configure per-component log levels.
Components {
FSAL = INFO;
NFS4 = EVENT;
}
## Where to log
Facility {
name = FILE;
destination =
"/mnt/nbnfs2/jcbecker/reexporter/var/log/ganesha.log";
enable = active;
}
}