8:35 a.m.
There currently aren't any 2.6 debs up on download.ceph.com (the builder
is broken at the moment), so if you have debs, then you have a 2.5.x
version, which does not have rados_kv, only rados_recov. To try
rados_kv, you'll need to either build yourself from source, or try an
RPM based distro.
Daniel
On 05/29/2018 09:21 AM, nigel davies wrote:
Sorry i installed from deb package. on Ceph repo install
On Fri, May 25, 2018 at 3:58 PM, nigel davies <nigdav007(a)gmail.com
<mailto:nigdav007@gmail.com>> wrote:
Thanks, i am sire i read some where it be.
I git the install from ceph repo. how do i tell it was built with
that support?
On Fri, May 25, 2018 at 3:45 PM, Jeff Layton <jlayton(a)kernel.org
<mailto:jlayton@kernel.org>> wrote:
On Fri, 2018-05-25 at 15:24 +0100, nigel davies wrote:
> Yes on both parts
>
>
> On Fri, 25 May 2018, 2:00 pm Kaleb S. KEITHLEY, <kkeithle(a)redhat.com
<mailto:kkeithle@redhat.com>> wrote:
> > On 05/25/2018 08:47 AM, nigel davies wrote:
> > > Thanks Jeff i ran the command and get
> > >
> > > librados.so.2 => /usr/lib/librados.so.2 (0x00007f9442342000)
> > >
> > > but same issue as before its really odd
> > >
> >
> > have you installed the nfs-ganesha-rgw rpm or deb?
> >
> > Is there a /usr/lib64/ganesha/libfsalrgw.so ?
> >
fs_ng and rados_ng are not supported in v2.5.5:
----------------8<-----------------------------
static int load_backend(const char *name)
{
if (!strcmp(name, "fs")) {
fs_backend_init(&recovery_backend);
return 0;
}
#ifdef USE_RADOS_RECOV
if (!strcmp(name, "rados_kv")) {
rados_kv_backend_init(&recovery_backend);
return 0;
}
#endif
return -1;
}
----------------8<-----------------------------
For rados_kv, I'd go look at how it was built and ensure that
-DUSE_RADOS_RECOV=ON at cmake time.
--
Jeff Layton <jlayton(a)kernel.org <mailto:jlayton@kernel.org>>
_______________________________________________
Support mailing list -- support(a)lists.nfs-ganesha.org
To unsubscribe send an email to support-leave(a)lists.nfs-ganesha.org