6:50 a.m.
Hi everyone,
I'm running a simple test with ganesha-next (but the issue exists at least
in latest V2.5.5-stable):
$ sudo mount -t nfs -o v4.0,users,nolock,soft,timeo=2,retrans=3 127.0.0.1:/
/mnt/nfs
$ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048 conv=fdatasync
dd: error writing '/mnt/nfs/dump/pw.1': Input/output error
1616+0 records in
1615+0 records out
1693450240 bytes (1,7 GB, 1,6 GiB) copied, 8,28076 s, 205 MB/s
$ sudo mount -t nfs -o users,nolock,soft,timeo=2,retrans=3 127.0.0.1:/
/mnt/nfs
$ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048 conv=fdatasync
2048+0 records in
2048+0 records out
2147483648 bytes (2,1 GB, 2,0 GiB) copied, 6,27708 s, 342 MB/s
The second mount is using nfs v4.1.
I don't have anything special in my configuration.
If I do the dd with a blocksize of 512k, it works fine.
If I set rsize/wsize to 524288 as mount options, the dd with bs=1024k still
fails.
The only log line I get is the following:
25/09/2018 13:47:25 : epoch 5baa2036 : caipirinha :
ganesha.nfsd-2381[svc_182] rpc :TIRPC :EVENT :svc_ioq_flushv() writev
failed (104)
Thanks for your help.
Best Regards
--
Boris Faure
Software Engineer
--
<https://www.scality.com/download-idc-marketscape/?utm_source=ScalityEmail...
7:40 a.m.
Hi, Boris.
Which FSAL is this?
Daniel
On 09/25/2018 07:50 AM, Boris Faure wrote:
Hi everyone,
I'm running a simple test with ganesha-next (but the issue exists at
least in latest V2.5.5-stable):
$ sudo mount -t nfs -o v4.0,users,nolock,soft,timeo=2,retrans=3
127.0.0.1:/ /mnt/nfs
$ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048 conv=fdatasync
dd: error writing '/mnt/nfs/dump/pw.1': Input/output error
1616+0 records in
1615+0 records out
1693450240 bytes (1,7 GB, 1,6 GiB) copied, 8,28076 s, 205 MB/s
$ sudo mount -t nfs -o users,nolock,soft,timeo=2,retrans=3 127.0.0.1:/
/mnt/nfs
$ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048 conv=fdatasync
2048+0 records in
2048+0 records out
2147483648 bytes (2,1 GB, 2,0 GiB) copied, 6,27708 s, 342 MB/s
The second mount is using nfs v4.1.
I don't have anything special in my configuration.
If I do the dd with a blocksize of 512k, it works fine.
If I set rsize/wsize to 524288 as mount options, the dd with bs=1024k
still fails.
The only log line I get is the following:
25/09/2018 13:47:25 : epoch 5baa2036 : caipirinha :
ganesha.nfsd-2381[svc_182] rpc :TIRPC :EVENT :svc_ioq_flushv() writev
failed (104)
Thanks for your help.
Best Regards
--
Boris Faure
Software Engineer
<https://www.scality.com/download-idc-marketscape/?utm_source=ScalityEmail...
_______________________________________________
Devel mailing list -- devel(a)lists.nfs-ganesha.org
To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
8:22 a.m.
My bad, I totally forgot that!
It's with the VFS FSAL with no special option there.
--
Boris Faure
Software Engineer
On Tue, Sep 25, 2018 at 2:40 PM Daniel Gryniewicz <dang(a)redhat.com> wrote:
Hi, Boris.
Which FSAL is this?
Daniel
On 09/25/2018 07:50 AM, Boris Faure wrote:
> Hi everyone,
> I'm running a simple test with ganesha-next (but the issue exists at
> least in latest V2.5.5-stable):
> $ sudo mount -t nfs -o v4.0,users,nolock,soft,timeo=2,retrans=3
> 127.0.0.1:/ /mnt/nfs
> $ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048
conv=fdatasync
> dd: error writing '/mnt/nfs/dump/pw.1': Input/output error
> 1616+0 records in
> 1615+0 records out
> 1693450240 bytes (1,7 GB, 1,6 GiB) copied, 8,28076 s, 205 MB/s
> $ sudo mount -t nfs -o users,nolock,soft,timeo=2,retrans=3 127.0.0.1:/
> /mnt/nfs
> $ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048
conv=fdatasync
> 2048+0 records in
> 2048+0 records out
> 2147483648 bytes (2,1 GB, 2,0 GiB) copied, 6,27708 s, 342 MB/s
>
> The second mount is using nfs v4.1.
> I don't have anything special in my configuration.
>
> If I do the dd with a blocksize of 512k, it works fine.
> If I set rsize/wsize to 524288 as mount options, the dd with bs=1024k
> still fails.
> The only log line I get is the following:
> 25/09/2018 13:47:25 : epoch 5baa2036 : caipirinha :
> ganesha.nfsd-2381[svc_182] rpc :TIRPC :EVENT :svc_ioq_flushv() writev
> failed (104)
>
> Thanks for your help.
> Best Regards
> --
> Boris Faure
> Software Engineer
>
> <
https://www.scality.com/download-idc-marketscape/?utm_source=ScalityEmail...
>
>
>
> _______________________________________________
> Devel mailing list -- devel(a)lists.nfs-ganesha.org
> To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
>
_______________________________________________
Devel mailing list -- devel(a)lists.nfs-ganesha.org
To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
--
<https://www.scality.com/download-idc-marketscape/?utm_source=ScalityEmail...
10:14 a.m.
Thanks. I'm unable to reproduce here. However, error 104 is
ECONNRESET, which means the client disconnected the socket. I don't
know why this only happens on 4.0 and not 4.1; is this fully reproducible?
Daniel
On 09/25/2018 09:22 AM, Boris Faure wrote:
My bad, I totally forgot that!
It's with the VFS FSAL with no special option there.
--
Boris Faure
Software Engineer
On Tue, Sep 25, 2018 at 2:40 PM Daniel Gryniewicz <dang(a)redhat.com
<mailto:dang@redhat.com>> wrote:
Hi, Boris.
Which FSAL is this?
Daniel
On 09/25/2018 07:50 AM, Boris Faure wrote:
> Hi everyone,
> I'm running a simple test with ganesha-next (but the issue exists at
> least in latest V2.5.5-stable):
> $ sudo mount -t nfs -o v4.0,users,nolock,soft,timeo=2,retrans=3
> 127.0.0.1:/ /mnt/nfs
> $ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048
conv=fdatasync
> dd: error writing '/mnt/nfs/dump/pw.1': Input/output error
> 1616+0 records in
> 1615+0 records out
> 1693450240 bytes (1,7 GB, 1,6 GiB) copied, 8,28076 s, 205 MB/s
> $ sudo mount -t nfs -o users,nolock,soft,timeo=2,retrans=3
127.0.0.1:/
> /mnt/nfs
> $ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048
conv=fdatasync
> 2048+0 records in
> 2048+0 records out
> 2147483648 bytes (2,1 GB, 2,0 GiB) copied, 6,27708 s, 342 MB/s
>
> The second mount is using nfs v4.1.
> I don't have anything special in my configuration.
>
> If I do the dd with a blocksize of 512k, it works fine.
> If I set rsize/wsize to 524288 as mount options, the dd with
bs=1024k
> still fails.
> The only log line I get is the following:
> 25/09/2018 13:47:25 : epoch 5baa2036 : caipirinha :
> ganesha.nfsd-2381[svc_182] rpc :TIRPC :EVENT :svc_ioq_flushv()
writev
> failed (104)
>
> Thanks for your help.
> Best Regards
> --
> Boris Faure
> Software Engineer
>
>
<https://www.scality.com/download-idc-marketscape/?utm_source=ScalityEmail...
>
>
>
> _______________________________________________
> Devel mailing list -- devel(a)lists.nfs-ganesha.org
<mailto:devel@lists.nfs-ganesha.org>
> To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
<mailto:devel-leave@lists.nfs-ganesha.org>
>
_______________________________________________
Devel mailing list -- devel(a)lists.nfs-ganesha.org
<mailto:devel@lists.nfs-ganesha.org>
To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
<mailto:devel-leave@lists.nfs-ganesha.org>
<https://www.scality.com/download-idc-marketscape/?utm_source=ScalityEmail...
12:01 p.m.
tcpdump would be good to chase this.
On Tue, Sep 25, 2018 at 6:10 PM, Daniel Gryniewicz <dang(a)redhat.com> wrote:
Hi, Boris.
Which FSAL is this?
Daniel
On 09/25/2018 07:50 AM, Boris Faure wrote:
> Hi everyone,
> I'm running a simple test with ganesha-next (but the issue exists at
> least in latest V2.5.5-stable):
> $ sudo mount -t nfs -o v4.0,users,nolock,soft,timeo=2,retrans=3
> 127.0.0.1:/ /mnt/nfs
> $ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048 conv=fdatasync
> dd: error writing '/mnt/nfs/dump/pw.1': Input/output error
> 1616+0 records in
> 1615+0 records out
> 1693450240 bytes (1,7 GB, 1,6 GiB) copied, 8,28076 s, 205 MB/s
> $ sudo mount -t nfs -o users,nolock,soft,timeo=2,retrans=3 127.0.0.1:/
> /mnt/nfs
> $ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048 conv=fdatasync
> 2048+0 records in
> 2048+0 records out
> 2147483648 bytes (2,1 GB, 2,0 GiB) copied, 6,27708 s, 342 MB/s
>
> The second mount is using nfs v4.1.
> I don't have anything special in my configuration.
>
> If I do the dd with a blocksize of 512k, it works fine.
> If I set rsize/wsize to 524288 as mount options, the dd with bs=1024k
> still fails.
> The only log line I get is the following:
> 25/09/2018 13:47:25 : epoch 5baa2036 : caipirinha :
> ganesha.nfsd-2381[svc_182] rpc :TIRPC :EVENT :svc_ioq_flushv() writev
> failed (104)
>
> Thanks for your help.
> Best Regards
> --
> Boris Faure
> Software Engineer
>
> <https://www.scality.com/download-idc-marketscape/?utm_sourc
> e=ScalityEmail&utm_medium=Email&utm_campaign=2018Predictions>
>
>
> _______________________________________________
> Devel mailing list -- devel(a)lists.nfs-ganesha.org
> To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
>
> _______________________________________________
Devel mailing list -- devel(a)lists.nfs-ganesha.org
To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
8:27 a.m.
I understood what was going on.
This is due to "timeo=2,retrans=3". In dmesg, I saw "nfs: server 127.0.0.1
not responding, timed out" and in tcpdump I saw that some WRITE were not
acked.
Because of that, the kernel decided that some write failed (and indeed,
they have…) and thus fdatasync() returned EIO.
Increasing the timeout parameter and/or the number of retransmissions
helped to no longer have IO errors.
--
Boris Faure
Software Engineer
On Tue, Sep 25, 2018 at 7:01 PM Malahal Naineni <malahal(a)gmail.com> wrote:
tcpdump would be good to chase this.
On Tue, Sep 25, 2018 at 6:10 PM, Daniel Gryniewicz <dang(a)redhat.com>
wrote:
> Hi, Boris.
>
> Which FSAL is this?
>
> Daniel
>
> On 09/25/2018 07:50 AM, Boris Faure wrote:
>
>> Hi everyone,
>> I'm running a simple test with ganesha-next (but the issue exists at
>> least in latest V2.5.5-stable):
>> $ sudo mount -t nfs -o v4.0,users,nolock,soft,timeo=2,retrans=3
>> 127.0.0.1:/ /mnt/nfs
>> $ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048
>> conv=fdatasync
>> dd: error writing '/mnt/nfs/dump/pw.1': Input/output error
>> 1616+0 records in
>> 1615+0 records out
>> 1693450240 bytes (1,7 GB, 1,6 GiB) copied, 8,28076 s, 205 MB/s
>> $ sudo mount -t nfs -o users,nolock,soft,timeo=2,retrans=3 127.0.0.1:/
>> /mnt/nfs
>> $ dd if=/dev/zero of=/mnt/nfs/dump/pw.1 bs=1024k count=2048
>> conv=fdatasync
>> 2048+0 records in
>> 2048+0 records out
>> 2147483648 bytes (2,1 GB, 2,0 GiB) copied, 6,27708 s, 342 MB/s
>>
>> The second mount is using nfs v4.1.
>> I don't have anything special in my configuration.
>>
>> If I do the dd with a blocksize of 512k, it works fine.
>> If I set rsize/wsize to 524288 as mount options, the dd with bs=1024k
>> still fails.
>> The only log line I get is the following:
>> 25/09/2018 13:47:25 : epoch 5baa2036 : caipirinha :
>> ganesha.nfsd-2381[svc_182] rpc :TIRPC :EVENT :svc_ioq_flushv() writev
>> failed (104)
>>
>> Thanks for your help.
>> Best Regards
>> --
>> Boris Faure
>> Software Engineer
>>
>> <
>>
https://www.scality.com/download-idc-marketscape/?utm_source=ScalityEmail...
>>
>>
>>
>> _______________________________________________
>> Devel mailing list -- devel(a)lists.nfs-ganesha.org
>> To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
>>
>> _______________________________________________
> Devel mailing list -- devel(a)lists.nfs-ganesha.org
> To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
>
_______________________________________________
Devel mailing list -- devel(a)lists.nfs-ganesha.org
To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
--
<https://www.scality.com/download-idc-marketscape/?utm_source=ScalityEmail...
1:18 p.m.
On Wed, Sep 26, 2018 at 03:27:45PM +0200, Boris Faure wrote:
I understood what was going on.
This is due to "timeo=2,retrans=3". In dmesg, I saw "nfs: server
127.0.0.1
not responding, timed out" and in tcpdump I saw that some WRITE were not
acked.
Because of that, the kernel decided that some write failed (and indeed,
they have???) and thus fdatasync() returned EIO.
I have a similar problem with ganesha 2.6.3, FSAL_GPFS and NFSv4.2
(haven't tried 4.0 or 4.1). When writing a large file the server logs
the following from time to time, and the data transfer stops for a few
seconds (or sometimes completely: "dd: error writing 'testfile': Remote
I/O error"):
epoch 5bad1b6e : srv : ganesha.nfsd-10257[svc_890] rpc :TIRPC :EVENT :svc_vc_recv:
0x7f5d78225aa0 fd 40 recv errno 104 (will set dead)
However, all WRITEs are replied with NFS4_OK. The network trace shows
that the client suddenly closes the connection (frame 8443) and opens
it again 3 seconds later:
8439 1.659424 srv -> cli TCP 66 2049 -> 712 [ACK] Seq=45441 Ack=96896309 Win=12399
Len=0 TSval=1320132075 TSecr=4244429882
8440 1.664256 srv -> cli NFS 94 V4 Reply (Call In 8436)
8441 1.664289 srv -> cli NFS 94 V4 Reply (Call In 8436)
8442 1.664373 srv -> cli NFS 314 V4 Reply (Call In 8436) WRITE
8443 1.664490 cli -> srv TCP 66 712 -> 2049 [FIN, ACK] Seq=96896309 Ack=45497
Win=1444 Len=0 TSval=4244429888 TSecr=1320132076
8444 1.664549 cli -> srv TCP 60 712 -> 2049 [RST] Seq=96896309 Win=0 Len=0
8445 1.664559 srv -> cli TCP 66 2049 -> 712 [ACK] Seq=45745 Ack=96896310 Win=12399
Len=0 TSval=1320132076 TSecr=4244429888
8446 1.664676 cli -> srv TCP 60 712 -> 2049 [RST] Seq=96896310 Win=0 Len=0
8447 4.682295 cli -> srv TCP 74 [TCP Port numbers reused] 712 -> 2049 [SYN] Seq=0
Win=29200 Len=0 MSS=1460 SACK_PERM=1 TSval=4244432906 TSecr=0 WS=128
8448 4.682348 srv -> cli TCP 74 2049 -> 712 [SYN, ACK] Seq=0 Ack=1 Win=28960 Len=0
MSS=1460 SACK_PERM=1 TSval=1320132831 TSecr=4244432906 WS=128
8449 4.682592 cli -> srv TCP 66 712 -> 2049 [ACK] Seq=1 Ack=1 Win=29312 Len=0
TSval=4244432906 TSecr=1320132831
In the kernel log on the client (/proc/sys/sunrpc/nfs_debug set to 0xffff)
I don't see any reason for closing the connection:
Sep 28 18:24:47.320222 kernel: NFS: write_begin(7.4/testfile(17096813), 4096@115703808)
Sep 28 18:24:47.320284 kernel: NFS: write_end(7.4/testfile(17096813), 4096@115703808)
Sep 28 18:24:47.320362 kernel: NFS: nfs_updatepage(7.4/testfile 4096@115703808)
Sep 28 18:24:47.320425 kernel: NFS: nfs_updatepage returns 0 (isize 115707904)
Sep 28 18:24:47.320501 kernel: NFS: initiated pgio call (req 0:57/17096813, 1048576 bytes
@ offset 112979968)
Sep 28 18:24:47.320586 kernel: NFS: initiated pgio call (req 0:57/17096813, 1048576 bytes
@ offset 114028544)
Sep 28 18:24:47.320662 kernel: NFS: initiated pgio call (req 0:57/17096813, 630784 bytes @
offset 115077120)
Sep 28 18:24:47.320737 kernel: --> nfs4_alloc_slot used_slots=fffffffffffffff
highest_used=59 max_slots=64
Sep 28 18:24:47.320813 kernel: <-- nfs4_alloc_slot used_slots=1fffffffffffffff
highest_used=60 slotid=60
Sep 28 18:24:47.320876 kernel: --> nfs4_alloc_slot used_slots=1fffffffffffffff
highest_used=60 max_slots=64
Sep 28 18:24:47.320950 kernel: <-- nfs4_alloc_slot used_slots=3fffffffffffffff
highest_used=61 slotid=61
Sep 28 18:24:47.321013 kernel: --> nfs4_alloc_slot used_slots=3fffffffffffffff
highest_used=61 max_slots=64
Sep 28 18:24:47.321076 kernel: <-- nfs4_alloc_slot used_slots=7fffffffffffffff
highest_used=62 slotid=62
Sep 28 18:24:49.103567 kernel: NFS: nfs_updatepage returns 0 (isize 115744768)
Sep 28 18:24:49.103758 kernel: NFS: write_begin(7.4/testfile(17096813), 4096@115744768)
Sep 28 18:24:49.103835 kernel: NFS: write_end(7.4/testfile(17096813), 4096@115744768)
The file was written using 'dd if=/dev/zero of=testfile
bs=64K count=32768'; smaller block sizes seem to make the
problem appear more often. The file system was mounted with
'timeo=600,retrans=2,sec=krb5i,vers=4.2'.
The client runs Ubuntu 18.04 (kernel 4.15.0-32-generic), the server Ubuntu
16.04 (4.4.0-109-generic) and GPFS 5.0.1.1.
What might make the client close the connection? Any thoughts are welcome.
Rolf
--
Rolf Anders ............................ http://www.rz.uni-augsburg.de
Universität Augsburg, Rechenzentrum ............. Tel. (0821) 598-2030
86135 Augsburg .................................. Fax. (0821) 598-2028
3:58 p.m.
Unless nfs server sends an error, the client is supposed to retry the
request forever with a hard mount. Use a different client (centsos7.5 for
example).
Regards, Malahal.
On Fri, Sep 28, 2018 at 11:59 PM Rolf Anders <rolf.anders(a)rz.uni-augsburg.de>
wrote:
On Wed, Sep 26, 2018 at 03:27:45PM +0200, Boris Faure wrote:
> I understood what was going on.
> This is due to "timeo=2,retrans=3". In dmesg, I saw "nfs: server
127.0.0.1
> not responding, timed out" and in tcpdump I saw that some WRITE were not
> acked.
> Because of that, the kernel decided that some write failed (and indeed,
> they have???) and thus fdatasync() returned EIO.
I have a similar problem with ganesha 2.6.3, FSAL_GPFS and NFSv4.2
(haven't tried 4.0 or 4.1). When writing a large file the server logs
the following from time to time, and the data transfer stops for a few
seconds (or sometimes completely: "dd: error writing 'testfile': Remote
I/O error"):
epoch 5bad1b6e : srv : ganesha.nfsd-10257[svc_890] rpc :TIRPC :EVENT
:svc_vc_recv: 0x7f5d78225aa0 fd 40 recv errno 104 (will set dead)
However, all WRITEs are replied with NFS4_OK. The network trace shows
that the client suddenly closes the connection (frame 8443) and opens
it again 3 seconds later:
8439 1.659424 srv -> cli TCP 66 2049 -> 712 [ACK] Seq=45441 Ack=96896309
Win=12399 Len=0 TSval=1320132075 TSecr=4244429882
8440 1.664256 srv -> cli NFS 94 V4 Reply (Call In 8436)
8441 1.664289 srv -> cli NFS 94 V4 Reply (Call In 8436)
8442 1.664373 srv -> cli NFS 314 V4 Reply (Call In 8436) WRITE
8443 1.664490 cli -> srv TCP 66 712 -> 2049 [FIN, ACK] Seq=96896309
Ack=45497 Win=1444 Len=0 TSval=4244429888 TSecr=1320132076
8444 1.664549 cli -> srv TCP 60 712 -> 2049 [RST] Seq=96896309 Win=0
Len=0
8445 1.664559 srv -> cli TCP 66 2049 -> 712 [ACK] Seq=45745 Ack=96896310
Win=12399 Len=0 TSval=1320132076 TSecr=4244429888
8446 1.664676 cli -> srv TCP 60 712 -> 2049 [RST] Seq=96896310 Win=0
Len=0
8447 4.682295 cli -> srv TCP 74 [TCP Port numbers reused] 712 -> 2049
[SYN] Seq=0 Win=29200 Len=0 MSS=1460 SACK_PERM=1 TSval=4244432906 TSecr=0
WS=128
8448 4.682348 srv -> cli TCP 74 2049 -> 712 [SYN, ACK] Seq=0 Ack=1
Win=28960 Len=0 MSS=1460 SACK_PERM=1 TSval=1320132831 TSecr=4244432906
WS=128
8449 4.682592 cli -> srv TCP 66 712 -> 2049 [ACK] Seq=1 Ack=1 Win=29312
Len=0 TSval=4244432906 TSecr=1320132831
In the kernel log on the client (/proc/sys/sunrpc/nfs_debug set to 0xffff)
I don't see any reason for closing the connection:
Sep 28 18:24:47.320222 kernel: NFS: write_begin(7.4/testfile(17096813),
4096@115703808)
Sep 28 18:24:47.320284 kernel: NFS: write_end(7.4/testfile(17096813),
4096@115703808)
Sep 28 18:24:47.320362 kernel: NFS: nfs_updatepage(7.4/testfile
4096@115703808)
Sep 28 18:24:47.320425 kernel: NFS: nfs_updatepage returns 0 (isize
115707904)
Sep 28 18:24:47.320501 kernel: NFS: initiated pgio call (req
0:57/17096813, 1048576 bytes @ offset 112979968)
Sep 28 18:24:47.320586 kernel: NFS: initiated pgio call (req
0:57/17096813, 1048576 bytes @ offset 114028544)
Sep 28 18:24:47.320662 kernel: NFS: initiated pgio call (req
0:57/17096813, 630784 bytes @ offset 115077120)
Sep 28 18:24:47.320737 kernel: --> nfs4_alloc_slot
used_slots=fffffffffffffff highest_used=59 max_slots=64
Sep 28 18:24:47.320813 kernel: <-- nfs4_alloc_slot
used_slots=1fffffffffffffff highest_used=60 slotid=60
Sep 28 18:24:47.320876 kernel: --> nfs4_alloc_slot
used_slots=1fffffffffffffff highest_used=60 max_slots=64
Sep 28 18:24:47.320950 kernel: <-- nfs4_alloc_slot
used_slots=3fffffffffffffff highest_used=61 slotid=61
Sep 28 18:24:47.321013 kernel: --> nfs4_alloc_slot
used_slots=3fffffffffffffff highest_used=61 max_slots=64
Sep 28 18:24:47.321076 kernel: <-- nfs4_alloc_slot
used_slots=7fffffffffffffff highest_used=62 slotid=62
Sep 28 18:24:49.103567 kernel: NFS: nfs_updatepage returns 0 (isize
115744768)
Sep 28 18:24:49.103758 kernel: NFS: write_begin(7.4/testfile(17096813),
4096@115744768)
Sep 28 18:24:49.103835 kernel: NFS: write_end(7.4/testfile(17096813),
4096@115744768)
The file was written using 'dd if=/dev/zero of=testfile
bs=64K count=32768'; smaller block sizes seem to make the
problem appear more often. The file system was mounted with
'timeo=600,retrans=2,sec=krb5i,vers=4.2'.
The client runs Ubuntu 18.04 (kernel 4.15.0-32-generic), the server Ubuntu
16.04 (4.4.0-109-generic) and GPFS 5.0.1.1.
What might make the client close the connection? Any thoughts are welcome.
Rolf
--
Rolf Anders ............................ http://www.rz.uni-augsburg.de
Universität Augsburg, Rechenzentrum ............. Tel. (0821) 598-2030
86135 Augsburg .................................. Fax. (0821) 598-2028
_______________________________________________
Devel mailing list -- devel(a)lists.nfs-ganesha.org
To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
1:21 p.m.
Malahal,
On Sat, Sep 29, 2018 at 02:28:00AM +0530, Malahal Naineni wrote:
Unless nfs server sends an error, the client is supposed to retry
the
request forever with a hard mount. Use a different client (centsos7.5 for
example).
thanks for this hint. With CentOS 7.5 (kernel 3.10.0-862.el7.x86_64)
I don't see this problem. So the bug is probably not in ganesha.
Rolf
--
Rolf Anders ............................ http://www.rz.uni-augsburg.de
Universität Augsburg, Rechenzentrum ............. Tel. (0821) 598-2030
86135 Augsburg .................................. Fax. (0821) 598-2028
4:39 a.m.
I removed the soft option and I no longer have the issue.
--
Boris Faure
Software Engineer
On Thu, Oct 4, 2018 at 8:22 PM Rolf Anders <rolf.anders(a)rz.uni-augsburg.de>
wrote:
Malahal,
On Sat, Sep 29, 2018 at 02:28:00AM +0530, Malahal Naineni wrote:
> Unless nfs server sends an error, the client is supposed to retry the
> request forever with a hard mount. Use a different client (centsos7.5 for
> example).
thanks for this hint. With CentOS 7.5 (kernel 3.10.0-862.el7.x86_64)
I don't see this problem. So the bug is probably not in ganesha.
Rolf
--
Rolf Anders ............................ http://www.rz.uni-augsburg.de
Universität Augsburg, Rechenzentrum ............. Tel. (0821) 598-2030
86135 Augsburg .................................. Fax. (0821) 598-2028
_______________________________________________
Devel mailing list -- devel(a)lists.nfs-ganesha.org
To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
--
<https://www.scality.com/download-idc-marketscape/?utm_source=ScalityEmail...
2040
days inactive
2050
days old
9 comments
4 participants
participants (4)
-
Boris Faure -
Daniel Gryniewicz -
Malahal Naineni -
Rolf Anders