10:38 a.m.
You will generally get a faster response by posting to the mailing list (
devel(a)lists.nfs-ganesha.org) than by mailing contributors directly.
FSALs are loaded by the fsal_manager in fsal_load.c. The library that is
loaded is <libdir>/ganesha/lib<fsal>.so where <fsal> is the Name given
in
the config for that FSAL, transformed to lower case. You will need to make
sure there are 3 things done correctly:
1. The name of your fsal library must match the name given in the config
2. Your fsal must be installed in the correct location
3. Your fsal must have MODULE_INIT and MODULE_FINI functions built into it.
Without seeing the source, it's a bit hard to debug.
Daniel
On Fri, Aug 2, 2019 at 7:41 AM kjl8401 <kjl8401(a)126.com> wrote:
dear dang,
hello, i have a question for you about using nfs-ganesha.The private
moudle NCSF do not load while compiled. you are an important contributior
of this project. I think you might meet this problem and hope you can
reply to me. Let me tell you about question.
the private NCSF moudle looks like load successfully
/FSAL/FSAL_NCSF/CMakeList.txt
libfsalncsf.so generated successfully
but execute the command
# ganesha.nfsd -f /etc/ganesha/ganesha.conf -L nfs-ganesha.log -N NIV_DEBUG
nfs-ganesha.log has not log
i do not konow what causes this problem and how to resolve.
I am looking forward to hearing from you. Thank you very much.
Best, Sincerely,
kjl8401
7:24 a.m.
New subject: 回复:Re: nfs-ganesha not load private Moudle
Can you turn on FULL_DEBUG and post the resulting log to the list, as a
text file rather than as an image?
Daniel
On 8/5/19 4:43 AM, kjl8401 wrote:
dear devel
Very sorry to trouble you！I think I have checked it according to
you, but I still don't know the cause of the problem。I feel very
depressed because of having wasted several days on this issue。I changed
the name of module from NCSF to NCDFS。Please tell me where my mistake
is and thank you very much!
ganesha.conf
The log of problem are the same as before！
I am looking forward to hearing from you. Thank you very much!
At 2019-08-02 23:38:34, "Daniel Gryniewicz" <dang(a)fprintf.net> wrote:
You will generally get a faster response by posting to the mailing
list (devel(a)lists.nfs-ganesha.org
<mailto:devel@lists.nfs-ganesha.org>) than by mailing contributors
directly.
FSALs are loaded by the fsal_manager in fsal_load.c. The library
that is loaded is <libdir>/ganesha/lib<fsal>.so where <fsal> is
the
Name given in the config for that FSAL, transformed to lower case.
You will need to make sure there are 3 things done correctly:
1. The name of your fsal library must match the name given in the config
2. Your fsal must be installed in the correct location
3. Your fsal must have MODULE_INIT and MODULE_FINI functions built
into it.
Without seeing the source, it's a bit hard to debug.
Daniel
On Fri, Aug 2, 2019 at 7:41 AM kjl8401 <kjl8401(a)126.com
<mailto:kjl8401@126.com>> wrote:
dear dang,
hello, i have a question for you about using nfs-ganesha.The
private moudle NCSF do not load while compiled. you are an
important contributior of this project. I think you might meet
this problem and hope you can reply to me. Let me tell you
about question.
the private NCSF moudle looks like load successfully
/FSAL/FSAL_NCSF/CMakeList.txt
libfsalncsf.so generated successfully
but execute the command
# ganesha.nfsd -f /etc/ganesha/ganesha.conf -L nfs-ganesha.log
-N NIV_DEBUG
nfs-ganesha.log has not log
i do not konow what causes this problem and how to resolve.
I am looking forward to hearing from you. Thank you very much.
Best, Sincerely,
kjl8401
_______________________________________________
Devel mailing list -- devel(a)lists.nfs-ganesha.org
To unsubscribe send an email to devel-leave(a)lists.nfs-ganesha.org
4:36 p.m.
New subject: 回复:Re: nfs-ganesha not load private Moudle
dear devel
Very sorry to trouble you！I think I have checked it according to you, but I still
don't know the cause of the problem。I feel very depressed because of having wasted
several days on this issue。I changed the name of module from NCSF to NCDFS。Please tell me
where my mistake is and thank you very much!
ganesha.conf
The log of problem are the same as before！
I am looking forward to hearing from you. Thank you very much!
At 2019-08-02 23:38:34, "Daniel Gryniewicz" <dang(a)fprintf.net> wrote:
You will generally get a faster response by posting to the mailing list
(devel(a)lists.nfs-ganesha.org) than by mailing contributors directly.
FSALs are loaded by the fsal_manager in fsal_load.c. The library that is loaded is
<libdir>/ganesha/lib<fsal>.so where <fsal> is the Name given in the
config for that FSAL, transformed to lower case. You will need to make sure there are 3
things done correctly:
1. The name of your fsal library must match the name given in the config
2. Your fsal must be installed in the correct location
3. Your fsal must have MODULE_INIT and MODULE_FINI functions built into it.
Without seeing the source, it's a bit hard to debug.
Daniel
On Fri, Aug 2, 2019 at 7:41 AM kjl8401 <kjl8401(a)126.com> wrote:
dear dang,
hello, i have a question for you about using nfs-ganesha.The private moudle NCSF do not
load while compiled. you are an important contributior of this project. I think you
might meet this problem and hope you can reply to me. Let me tell you about question.
the private NCSF moudle looks like load successfully
/FSAL/FSAL_NCSF/CMakeList.txt
libfsalncsf.so generated successfully
but execute the command
# ganesha.nfsd -f /etc/ganesha/ganesha.conf -L nfs-ganesha.log -N NIV_DEBUG
nfs-ganesha.log has not log
i do not konow what causes this problem and how to resolve.
I am looking forward to hearing from you. Thank you very much.
Best, Sincerely,
kjl8401
4:43 p.m.
New subject: 回复:Re: nfs-ganesha not load private Moudle
dear devel
Very sorry to trouble you！I think I have checked it according to you, but I still
don't know the cause of the problem。I feel very depressed because of having wasted
several days on this issue。I changed the name of module from NCSF to NCDFS。Please tell me
where my mistake is and thank you very much!
ganesha.conf
The log of problem are the same as before！
I am looking forward to hearing from you. Thank you very much!
At 2019-08-02 23:38:34, "Daniel Gryniewicz" <dang(a)fprintf.net> wrote:
You will generally get a faster response by posting to the mailing list
(devel(a)lists.nfs-ganesha.org) than by mailing contributors directly.
FSALs are loaded by the fsal_manager in fsal_load.c. The library that is loaded is
<libdir>/ganesha/lib<fsal>.so where <fsal> is the Name given in the
config for that FSAL, transformed to lower case. You will need to make sure there are 3
things done correctly:
1. The name of your fsal library must match the name given in the config
2. Your fsal must be installed in the correct location
3. Your fsal must have MODULE_INIT and MODULE_FINI functions built into it.
Without seeing the source, it's a bit hard to debug.
Daniel
On Fri, Aug 2, 2019 at 7:41 AM kjl8401 <kjl8401(a)126.com> wrote:
dear dang,
hello, i have a question for you about using nfs-ganesha.The private moudle NCSF do not
load while compiled. you are an important contributior of this project. I think you
might meet this problem and hope you can reply to me. Let me tell you about question.
the private NCSF moudle looks like load successfully
/FSAL/FSAL_NCSF/CMakeList.txt
libfsalncsf.so generated successfully
but execute the command
# ganesha.nfsd -f /etc/ganesha/ganesha.conf -L nfs-ganesha.log -N NIV_DEBUG
nfs-ganesha.log has not log
i do not konow what causes this problem and how to resolve.
I am looking forward to hearing from you. Thank you very much.
Best, Sincerely,
kjl8401
1749
days inactive
1752
days old
3 comments
3 participants
participants (3)
-
Daniel Gryniewicz -
Daniel Gryniewicz -
kjl8401